User`s manual

Chapter 5 Cross Connection 5620 Model Descriptor for LA-110 User’s Manual
5-6 Adding Cross Connections
Table 5-3. Add FR VC Connections Parameters (Cont.)
Parameter Valid Ranges
Continuity
Check
The VCC admin status.
Off Two Way (down), On Two Way (up), On-source, On-sink
Read-only
FR:
DLCI 16–991
Leaf XC Yes, No
IWF The IWF mode.
1…42
For each ID, the corresponding type will appear.
SSCS DLCI Allows configuration of the FR SSCS DLCI that is transferred to the remote FR unit
16–991, 1022
This parameter is only available when IWF (Function Mode) is set to Network.
AAL1 Stream VC Connection

To add an AAL1 Stream VC cross connection:
1. In the Navigator, double-click the Connections container to display the AAL1
Stream VC Connection option.
2. Select AAL1 Stream VC Connection, right-click and select
Add Component > Cross Connection > AAL1 Stream Connection.
Figure 5-4. AAL1 Stream VC Connection