User`s manual
5620 Model Descriptor for LA-110 User’s Manual Chapter 5 Cross Connection
Adding Cross Connections 5-5
FR VC Connection
To add a Data FR VC cross connection:
1. In the Navigator, double-click the Connections container to display the
FR VC Connection option.
2. Select FR VC Connection, right-click and select
Add Component > Cross Connection > FR Connection.
Figure 5-3. Add FR VC Connection
3. Fill in the fields, as described in Table 5-3.
4. Click <Save> to save the changes.
Table 5-3. Add FR VC Connections Parameters
Parameter Valid Ranges
VPI The VPI value of the ATM end point.
0..31
VCI The VCI value of the ATM end point.
0..255
Traffic
Descriptor
Identifies the row in the Traffic Descriptor (TD).
1…200 (values available as defined in TD table)