User`s manual

5620 Model Descriptor for LA-110 User’s Manual Chapter 4 Port Configuration and Monitoring
CES E1 Port Monitoring 4-81
Table 4-42. SHDSL Port – AAL5 – VCC Statistics Parameters
Parameter Remarks
Port The selected port
SHDSL
Read-only
Type The interface type
AAL5
Read-only
AAL5 VCC Table
VPI The VPI value of the AAL5 VCC.
Read-only
VCI The VCI value of the AAL5 VCC.
Read-only
CRC Error The number of AAL5 CPCS PDUs received with CRC-32 errors on this AAL5 VCC at the
interface associated with an AAL5 entity.
Read-only
SAR Timeouts The number of partially re-assembled AAL5 CPCS PDUs which were discarded on this
AAL5 VCC at the interface associated with an AAL5 entity because they were not fully
re-assembled within the required time period. If the re-assembly timer is not supported,
then this object contains a zero value.
Read-only
Oversized SDUs The number of AAL5 CPCS PDUs discarded on this AAL5 VCC at the interface
associated with an AAL5 entity because the AAL5 SDUs were too large.
Read-only
4.13 CES E1 Port Monitoring
LA-110 MD allows you to view CES E1 port performance statistics.
Basic tasks include:
• Viewing current data
• Viewing interval data.
Current Data Statistics

To view current day data statistics of the CES E1 port:
• In the LA-110 Node Draw, select the CES E1 port, right-click and select
Monitor > Current Data.
A Monitor form appears, displaying the CES E1 port current data statistics
results as shown in Figure 4-53 and as listed in Table 4-43.