User`s manual

Installation and Setup 2-1
Chapter 2
Getting Started
This chapter explains the first steps required to get the RAD LA-110 Model
Descriptor SNMP management system up and running. It describes how to install
LA-110 Model Descriptor, its basic features, functionality, and concepts of the
graphical user interface. It also provides instructions how to create LA-110 nodes
on the Network map. (For the specific tasks possible with LA-110 Model
Descriptor, please refer to the subsequent chapters.)
This chapter covers the following tasks:
Preliminary hardware configuration of LA-110
Installing LA-110 MD
Launching LA-110 MD
Using the LA-110 MD main window.
2.1 Hardware Requirements
The minimum hardware requirements for the 5620 SNMP DM and the 5620
Network Manager are according to Alcatel installation guides. Please refer to these
prior to installation.
2.2 Installation and Setup
This section provides the installation instructions for the 5620 SNMP DM. Once
the descriptor is installed, an LA-110 node should be created.
5620 SNMP Descriptor Module File Installation
This section explains how to install the 5620 SNMP DM file in a 5620 Network
Manager unit.
Before starting, note that Upgrade from R1 to R2 requires that ALL LA-110 Nodes
must be recreated.
To install the LA-110-5620 SNMP DM Equipment Descriptor:
1. Log in as user root.
2. Insert the RAD Model Descriptor CD-ROM into the CD-ROM drive.
Note