User`s manual

5620 Model Descriptor for LA-110 User’s Manual Chapter 4 Port Configuration and Monitoring
SHDSL Port Monitoring 4-77
Table 4-40. SHDSL Port – AAL1 – VCC Statistics Parameters
Parameter Remarks
Port The selected port
SHDSL
Read-only
Type The interface type
AAL1
Read-only
AAL1 VCC Table – CES XC / Transparent XC
VPI The VPI value of the AAL1 VCC.
Read-only
VCI The VCI value of the AAL1 VCC.
Read-only
Rx Seq Errors Total number of sequence numbering errors detected in the cells received for the
corresponding connection.
Read-only
Rx SNP Errors Total number of SNP errors detected in the cells received for the corresponding
connection.
Read-only
Rx Resync Total number of resynchronization errors that occurred for the corresponding
connection.
Read-only
Not applicable for AAL1 transparent XCs
Pointer Parity
Errors
Total number of pointer errors detected in the cells received for the corresponding
connection.
Read-only
Not applicable for AAL1 transparent XCs
Viewing SHDSL AAL5 statistics
Basic tasks include:
Viewing interface statistics
Viewing VCC statistics.
Interface Statistics
To view AAL5 interface statistics of the SHDSL port:
In the LA-110 Node Draw, select the SHDSL port, right-click and select
Monitor > AAL5 > Interface Statistics.
A Monitor form appears, displaying the AAL5 interface statistics results as
shown in Figure 4-51 and as listed in Table 4-41.