User`s manual

5620 Model Descriptor for LA-110 User’s Manual Chapter 4 Port Configuration and Monitoring
SHDSL Port Monitoring 4-73
Table 4-38. SHDSL Port – ATM Layer – VCL Statistics Parameters
Parameter Remarks
Port The selected port
SHDSL
Read-only
Type The interface type
ATM
Read-only
VPI The VPI value of the VCL.
Read-only
VCI The VCI value of the VCL
Read-only
In Cells
(CLP=0+1)
The total number of cells received with correct HECs.
Read-only
In Cells (CLP=0) The number of cells received with correct HECs and CLP=0.
Read-only
In Dropped The number of cells, in ingress direction, discarded due to policing violation
Read-only
Out Cells
(CLP=0+1)
The total number of cells transmitted.
Read-only
Out Cells
(CLP=0)
The number of cells transmitted with CLP=0.
Read-only
Rx AIS Cells Total number of AIS cells received on the VC.
Read-only
Rx CC Cells Total number of Continuity Check cells that were received on the VC.
Read-only
Rx RDI Cells Total number of RDI cells received on a VC.
Read-only
Tx AIS Cells Total number of AIS cells that were transmitted on a VC.
Read-only
Tx CC Cells Total number of continuity check cells transmitted on a VC (when there is no data cells
and the connection is in 'source' continuity check mode).
Read-only