User`s manual

5620 Model Descriptor for LA-110 User’s Manual Chapter 4 Port Configuration and Monitoring
SHDSL Port Monitoring 4-71
Table 4-37. SHDSL Port – ATM Layer – Interface Statistics Parameters
Parameter Remarks
Port The selected port
SHDSL
Read-only
Type The interface type
ATM
Read-only
Traffic
In Cells The total number of octets received on the interface, including framing characters.
Read-only
Out Cells The total number of octets transmitted out of the interface, including framing characters.
Read-only
In CLP0s The number of cells received with correct HECs and CLP=0 and not misrouted.
Read-only
Out CLP0s The number of cells transmitted with CLP=0.
Read-only
In CLP1s The number of cells received with correct HECs and CLP=1 and not misrouted.
Read-only
Out CLP1s The number of cells transmitted with CLP=1.
Read-only
In EFCIs The number of cells received with EFCI bit set by the Agent.
Read-only
In OAM The number of OAM cells received with correct HECs.
Read-only
Out OAM The number of transmitted OAM cells.
Read-only
Errors
In Discards The total number of frames discarded during processing by the receive path.
Read-only
In Errors The number of inbound packets which were chosen to be discarded even though no
errors had been detected to prevent their being deliverable to a higher-layer protocol.
One possible reason for discarding such a packet could be to free up buffer space.
Read-only