User`s manual

5620 Model Descriptor for LA-110 User’s Manual Chapter 4 Port Configuration and Monitoring
LAN Port Monitoring 4-61
Table 4-32. LAN Port Interface Statistics Parameters
Parameter Remarks
Port The selected port
LAN
Read-only
Type The interface type
Ethernet Csmacd
Read-only
In Octets The total number of octets received on the interface, including framing characters.
Read-only
Applies to the LAN port only (and not the FE port)
In Frames The number of packets, delivered by this sub-layer to a higher (sub-)layer, addressed to a
unicast address (i.e. not addressed to a multicast or broadcast address at this sub-layer.
Read-only
Out Frames The total number of packets that higher-level protocols requested be transmitted, and
which were not addressed to a multicast or broadcast address at this sub-layer, including
those that were discarded or not sent.
Read-only
In Discards The total number of frames discarded during processing by the receive path.
Read-only
Out Discards The total number of frames discarded during processing by the transmit path.
Read-only
Received From Ethernet
Alignment Error
Frames
Number of frames received with alignment errors
FCS Error
Frames
Number of frames received with CRC errors (FCS – Frame Check Sequence)
Frames Too
Long
The number of frames discarded by this port due to excessive size
Transmitted To Ethernet
Single Collision
Frames
A counter of successfully transmitted frames for which transmission is inhibited by exactly
one collision. Valid only in half duplex mode
Multiple
Collision Frames
A counter of successfully transmitted frames for which transmission is inhibited by more
than one collision. Valid only in half duplex mode