User`s manual

Chapter 4 Port Configuration and Monitoring 5620 Model Descriptor for LA-110 User’s Manual
4-58 Data Port Monitoring
Table 4-30. Data FR Port Monitoring – FR Interface Statistics Parameters
Parameter Remarks
Port The selected port
Read-only
Type The interface type
Frame Relay
Read-only
In Frames
The number of packets, delivered by this sub-layer to a higher (sub-)layer, addressed to a unicast
address (i.e. not addressed to a multicast or broadcast address at this sub-layer.
Read-only
Out Frames The total number of packets that higher-level protocols requested be transmitted, and
which were not addressed to a multicast or broadcast address at this sub-layer, including
those that were discarded or not sent.
Read-only
In Discards The total number of frames discarded during processing by the receive path.
Read-only.
In Octets The total number of octets received on the interface, including framing characters.
Read-only
Out Octets The total number of octets transmitted out of the interface, including framing characters.
Read-only
Viewing AAL1 Stream Interface Statistics
To view the AAL1 Stream interface statistics of the Data FR port:
In the LA-110 Node Draw, select the Data FR port, right-click and select
Monitor > AAL1 Stream Interface > Interface Statistics.
A Monitor form appears, displaying the current statistics results as shown in
Figure 4-40 and as listed in Table 4-31.