User`s manual

5620 Model Descriptor for LA-110 User’s Manual Chapter 4 Port Configuration and Monitoring
CES E1 Port Configuration 4-55
Table 4-28. CES E1 Port – Bundles Table Parameters
Parameter Remarks
Port The selected port
CES E1
Read-only
Bundles Table
Bundle ID The bundle ID.
1…31
Bundle Name The bundle name, based on the index value the agent selected for the (new) Bundle
interface.
Bundle 1…Bundle 31
VPI The VPI value which is associated with this bundle
VCI The VCI value which is associated with this bundle
Connection
Status
The associated connection status.
Up, Down, Unknown
Loopback Testing

To configure CES E1 port loopback testing:
• In the LA-110 Node Draw, select the CES E1 port, right-click and select
Configure > Loopback Test.
Figure 4-38. CES E1 Port – Loopback Test
3. Fill in the fields, as described in Table 4-29.
4. Click <Save> to save the changes.