User`s manual

Chapter 4 Port Configuration and Monitoring 5620 Model Descriptor for LA-110 User’s Manual
4-54 CES E1 Port Configuration
Table 4-27. CES E1 Port – Bundles Configuration Parameters
Parameter Remarks
Port The selected port
CES E1
Read-only
Type The protocol application which runs above the physical port.
E1
Read-only
Next Free
Bundle
Used to assist the NMS in selecting a value for the bundle index.
1-31
Read-only
Time Slots
(1…31)
Determines the timeslots assigned to a bundle.
Off, On, Used - # (the number is the bundle number)
Bundles Table
In the Bundles table, you can view all existing bundles' statuses and you can delete
a selected row that is not attached to a VCC.
To view and delete entries in the CES E1 port Bundles table:
1. In the LA-110 Node Draw, select the CES E1 port, right-click and select
Configure > Bundles Table.
Figure 4-37. CES E1 Port – Bundles Table
2. To delete a row in the Bundles Table, select the relevant row and click <Delete
Row>.