User`s manual

Chapter 4 Port Configuration and Monitoring 5620 Model Descriptor for LA-110 User’s Manual
4-52 CES E1 Port Configuration
Table 4-26. CES E1 Port – Interface Information Parameters
Parameter Remarks
Port The selected port
CES E1
Read-only
Type The protocol application which runs above the physical port.
E1
Read-only
Oper. Status The actual link status.
Up, Down
Read-only
Last Change This field indicates the time of the last change on the port.
Read-only
Bundles Configuration
Bundles Configuration is disabled when the Line Type is "Unframed".
Bundles configuration involves assigning an available time slot to a bundle.
To configure CES E1 port bundles configuration:
1. In the LA-110 Node Draw, select the CES E1 port, right-click and select
Configure > Bundles Configuration.
Note