Specifications

• The radio modem can only be operated on frequencies stipulated by the body authorised by the

radio operation administration in the respective country and cannot exceed the maximum permitted

output power. RACOM is not responsible for products used in an unauthorised way.

• Equipment mentioned in this operator manual may only be used in accordance with instructions

contained in this manual. Error-free and safe operation of this equipment is only guaranteed if this

equipment is transported, stored, operated and controlled in the proper manner. The same applies

to equipment maintenance.

• In order to prevent damage to the radio modem and other terminal equipment the supply must always

be disconnected upon connecting or disconnecting the cable to the radio modem data interface. It

is necessary to ensure that connected equipment has been grounded to the same potential. Before

connecting the supply cable the output source voltage should be disconnected.

• Only the undermentioned manufacturer is entitled to repair any devices.

7.3. Product Conformity

Hereby, RACOM s. r. o., declares that this RE400 radio modem is in compliance with the essential

requirements and other relevant provisions of Directive 1999/5/ES. This equipment therefore bears the

CE marking. The warning exclamation mark in the circle marks the radio modem as class 2 equipment

denoting radio equipment with possible limitations or with requirements on authorisation to use radio

equipment in certain countries.

Fig. 7.1: CE sign

Conditions for Radio Modems Operation