Specifications

4. Table of Technical Parameters
Tab. 4.1: Table of technical parameters MX160
Tx: 154,725–159,725 MHz/159,325–164,325 MHz
Frequency range
Rx: 159,325–164,325 MHz/154,725–159,725 MHz
200 kHzChannel spacing
software in range +3.2 MHz from base frequencyMeans of setting working frequency
better than -104 dBmReceiver sensitivity for BER 10
-3
0.1–5 W
Software adjustable output power
1)
0.1–25 W
133 kbit/s in 200 kHz channelMax. modulation rate for transmitting
Optional modules
ADIO (analog and digital inputs and outputs)slot 5
Ethernet 10/100 Mbpsslot 4
2×RS232slot 3
RS232 or galv.sep. RS232 or RS422/RS485slot 2
RS232 or galv.sep. RS232 or RS422slot 1
SMA + SMAAntenna connector
> 500.000 hours (> 50 years)MTBF(Mean Time Between Failure)
13.8 VSupply nominal voltage
10.8–15.6 VSupply voltage range
420 mA + modules: (Eth. 30 mA, ADIO 50 mA, SCC 5 mA)Idle consumption (Rx)
2)
5.5 A / 25 WTransmission consumption (Tx)
2)
2.5 mAConsumption in SLEEP mode
-25 to +55 °COperating range of temperature
-40 to +85 °CStorage range of temperature
208×108×63 mm (71 mm DIN rail including)
Mechanical dimensions
184×108×63 mm (short version)
198×65 mm, ø 4.8 mmSpacing of fastening holes
1.3 kgWeight
1) Availability of specific types and frequencies check here
1
, please. Presently these types
2
are under
mass production.
2) Approximate values dependent on frequency and modem type.
1
http://www.racom.eu/eng/products/rfp.html
2
http://www.racom.eu/eng/products/radio-modems-mr400.html#specifications
17© RACOM s.r.o. Wideband modems PROFI MX160
Table of Technical Parameters