Specifications

5. Dimensional Diagram and Labeling Modems

Dimensional Diagram

mobilemounting4×M4

DIN35railmounting2×M4notforP

RFpower25W(typeP)4×M4only

Fig. 5.1: Mounting dimensions of the radiomodem MR400, MR300 and MR160

The modem can be fasten by four screws M4 (for mobile application especially) or by the mounting rail

DIN35 (stable applications). The flexile clamps mounted in the central holes are used for fastening on

the DIN35 rail.

For the high-performance P model the modem is mounted on the back wall to ensure sufficient cooling

of the modem. In this case 4x M4 screws are used for mounting purposes. There are no centre holes

in the P version for attachment to a DIN rail.

Labelling Radio Modems

is described in next table:

Dimensional Diagram and Labeling Modems