Specifications

PROFIBUS_DP is the most important settings window; fill in settings as shown below, click Recalculate

and confirm by clicking OK. Confirm the values in all open windows and click the icon Download to

Module. Tslot_Init is a value which fundamentally influences operation of the entire device. 16 383 t_bit

is the maximum value which helps test radio transmission. We recommend setting as described in

chapter "Advanced Settings – Calculation of minimum slot time".

7.3. RipEX settings

7.3.1. Operating mode

See chapter Advanced configuration

of the manual.

If there is no more than a single repeater on your network, we recommend using Bridge mode. Profibus

DP is always a master–slave type network in which there is no danger of radio channel collisions.

http://www.racom.eu/eng/products/m/ripex/h-menu.html

Profibus