Installation Manual

Page 3
Installation Instructions
Step 1. Rail Assembly: Attach the Rear Brackets to each Fixed Rail using (4) 8-32 Flat
Head Screws and (4) 8-32 Nuts. Always install the (4) screws and nuts as widely
spaced as possible.
There are multiple ways to orient the Rear Brackets as shown below.
Step 2. Front Rack Attachment: Attach the front of each Fixed Rail to the rack using
hardware from the Rack Hardware Kit (see Page 2).
1U Shown
(2U & 3U Similar)
2U Shown
(1U & 3U Similar)