User manual

To access the PDU GUI, please select Remote Power > Start Service > Apply
P. 4
Skip the above step if the IP KVM has been already login
< 2.2 > IPS-01, free PDU management software, specially designed for IP KVM
Step 1. Open Internet Explorer ( I.E. ), version 6.0 or above
Step 2. Enter the IP KVM address into the address bar
- For Single IP KVM model, such as
UIP-1602 - http://192.168.1.22
- For Dual IP KVM model, such as
MU-IP3224 - http://192.168.1.22 ( for 1st IP ) &
http://192.168.1.23 ( for 2nd IP )
Step 3. Enter username ( default is super ) &
password ( default is pass )
Web-Based GUI (IPS-01) is applicable to the CyberView Connection only.
No software application required to be installed on the PC.
CyberView IP KVM allows the user to manage servers & PDUs together.