User`s manual

Step 4

Connect the first computer’s keyboard cable to the KVM Switch. Using another PS/2 cable

connect one end to PS/2 keyboard port on the computer, and the other end to the PC1

keyboard port on the back of SMK-580. If your computer has an AT type keyboard port, you will

need a PS/2 to AT keyboard adapter.

Step 5

Double-check all of the connections. You can check the color of keyboard and mouse

connector to make sure the keyboard and mouse cables go to the correct ports.

Step 6

Repeat step 2 to 5 for the remainder of the computers.

Step 7

Attach the power supply to the SMK-580 unit and plug the other end into an electrical

receptacle. Now you will see the LED for Port 1 light up, and you will hear a beep.

Usage

The power on state of 8-port SMK-580:

When you power on the SMK-580, it will ask you for the password, the default password

value is eight zero –“ 00000000 “. Please key in eight zero and enter the same value at

retype field.

Note: If you are not familiar with the operation of OSD menu, please don’t change the

password – i.e. keep default eight zero (00000000) value. Otherwise, if you have set the

password and unfortunately forget the password, you need send it back to your distributor for

maintaining the password.

7-Segment LED Indication

When you select one of eight PC ports and this PC is shut down or this PC port is disconnected

to the PC, the selected port LED will flash. When you select one of eight PCs ports and this PC

is powered on, the selected port LED is lit.

SMK-580

1 2 3 4 5 6 7 8