User`s manual

On Screen Display Operation
When you pop up the OSD menu window go through the hot key, you will see the following
small window on your monitor.
a. The 1
ST
line bar is Bank no.
☼
SYSTEM 08 08SYSTEM 07 07
SYSTEM 06 06
☼
SYSTEM 05 05
☼
SYSTEM 04 04
☼
SYSTEM 03 03
☼
SYSTEM 02 02SYSTEM 01 01
BANK : 1
b. The 2
nd
block is your PC
system name list. You will find the
system number list from 01 to 8.
You can define your PC name in
maximum 8 characters. The
factory default names for all ports
is “SYSTEM 01”, to “SYSTEM
08“. Besides, the sun symbol “ ☼
“ near to the PC name represents
the PC system is powered on.
To use up arrow key “ y “ or down arrow key “ z “ to select port for destination PC name. After
you have selected the PC port already, you can press the ENTER Key to switch the PC port
you want immediately
©/ª: SELECT PORT
To use “ PgUp “ key or “ PgDn” key for selecting previous or next Bank no. (or Box No.)
PgDn/PgUp: BANK SELECT
To press “ INS” key for editing PC name. After finishing the edit, please press “ Enter “ key for
saving information.
TAB : NEXT INSERT :EDIT
ESC : QUIT ENTER :COMPLETE
12