Specifications
a. The “ OSD: 10 SEC” means
that the OSD windows
display or PC system name
exists 10 sec. on your
monitor. You can modify it
from 05 sec to 99 sec. The
factory default value is 10
sec..
b. The “ SCAN TIME” means that scan interval from one PC port to next PC port. The
default SCAN time is 10 sec and the maximum scan time is 99 sec.
c. The “ CHANGE PASSWORD” is for user to avoid all PC systems to be intruded by the
other person. The default password is 8 digits “ 00000000 “.
There is an enter password window showed out when you select this item and then
press the Enter. The maximum password is eight digits. After you key in the
password already and press the Enter key, there is another window for confirming your
typed password.
You need to retype the password again for rechecking your previous key-in password
is matched or not.
15 ☼SYSTEM 15 16 SYSTEM 16
OSD : 1 0 SEC. ( CHANGE PASSWORD
SCAN: 1 0 SEC. CONSOLE ON/OFF
ESC : QUIT ENTER :COMPLETE
TAB : NEXT INSERT :EDIT
ENTER PASSWORD : █
ESC : QUIT ENTER : COMPLETE
ENTER NEW PASSWORD : █
ESC : QUIT ENTER : COMPLETE
RETYPE NEW PASSWORD : █
ESC : QUIT ENTER : COMPLETE
NEW PASSWORD COMPLETE
ESC : QUIT ENTER : COMPLETE