User manual

Key Features
1U SCSI Rack-mount
Kit
High-density 1U Rack-mount form factor
The SCSI enclosure is capable of mixing technologies and is compatible with a wide range
of single-ended and LVD SCSI internal tape drives, including:
DAT 40, DAT 72 and DAT 160 SCSI Tape Drives
LTO-1 Ultrium 232, LTO-2 Ultrium 448, LTO-3 Ultrium 920 and LTO-4 Ultrium 1760
SCSI Tape Drives
SCSI enclosure Provides up to 3.2 TB of storage capacity (assuming 2:1 compression using
two LTO-4 Ultrium 1760 drives)
Data transfer rates up to 1 TB/hr (assuming 2:1 data compression using two LTO-4 Ultrium
1760 drives)
Latching switch for the 1U rack allows for auto restart after power has been interrupted and
restore
SAS Upgrade Kit available in order to support one SAS drive and one SCSI drive.
1U USB Rack-mount
Kit
High-density 1U Rack-mount form factor
The USB enclosure supports , DAT 40 USB, DAT 72USB, DAT 160 USB and DAT 320 USB
tape drives and also supports RDX 160GB, RDX 320GB, RDX 500GB and RDX 1TB
removable hard disk drives.
USB enclosure provides up to 640 GB of storage capacity, using two DAT 320 USB drives
and up to 2 TB of storage capacity using two RDX 1 TB removable hard disk drives.
Data transfer rates of 86.4G/hour (assuming 2:1 data compression) using two DAT 320
drives and up to 216GB/hour using two RDX 1 TB removable hard disk drives.
Latching switch for the 1U rack allows for auto restart after power has been interrupted and
restore
SAS Upgrade Kit available in order to support one SAS drive and one USB drive
1U SAS Rack-mount Kit High-density 1U Rack-mount form factor with auto-configuring 1.5Gb, 3Gb and 6Gb SAS
support
The SAS enclosure supports up to two DAT 160 SAS, DAT 320 SAS, Ultrium 448 SAS,
Ultrium 920 SAS, Ultrium 1760 SAS or Ultrium 3000 SAS tape drives.
Provides up to 6 TB of storage capacity (assuming 2:1 compression) using two Ultrium 3000
drives.
Data transfer rates up to 2 TB/hr (assuming 2:1 compression) using two Ultrium 3000 drives
Latching switch for the 1U rack allows for auto restart after power has been interrupted and
restore
Supports up to two separate SAS channels for connectivity to two separate servers or two
separate HBA ports.
3U SCSI Rack-mount
Kit
Provides up to 3.2 TB of compressed storage capacity using two LTO-4 Ultrium 1840 or 6.4
TB with four LTO-4 Ultrium 1760 tape drives
3U Rack-mount form factor.
Supports two full-height or four half-height SCSI-based tape drives, or a combination one
full-height and two half-height devices.
Includes new ease-of-use features for easier integration and management of HP tape
devices
Compatible with a wide range of single-ended and LVD SCSI internal tape drives, including:
DAT 40, DAT 72 and DAT 160 SCSI Tape Drives
DAT 72x6 Tape Autoloader
DLT VS160 SCSI Tape Drives
SDLT 600 SCSI Tape Drives
LTO-1 Ultrium 232, LTO-2 Ultrium 448, LTO-3 Ultrium 920, LTO-3 Ultrium 960, LTO-4
Ultrium 1760 and LTO-4 Ultrium 1840 SCSI Tape Drives
Supports up to four separate SCSI buses
Top access and removable drive trays allow customers to slide unit out of rack for easier
access to tape drives
3U SAS Rack-mount Kit Provides up to 6 TB of compressed storage capacity using two LTO-5 Ultrium 3280 SAS
drives or 12 TB using 4 LTO-5 3000 SAS drives.
3U Rack-mount form factor with auto-configuring 1.5Gb, 3Gb and 6Gb SAS support
QuickSpecs
HP Rack-mount Kits
Features
DA - 10854 Worldwide QuickSpecs — Version 65 — 10.5.2012 Page 3