User manual
NOTE:
Go to
http://www.hp.com/storage/SPOCK
to confirm what cable is needed.
Optional SCSI Cable
-
add additional SCSI
buses to the 3U Rack-
mount Kits for use with
certain legacy tape
drives.
HP Ultra 320 SCSI Cable Kit
A field upgrade kit required when going from 2 to 4 ports on the 3U Rack-mount
kit. Also required for the following Rack-mount kits when adding ultra 160 or
greater drives (350546-B21, 350545-B21, 350544-B21, 274338-B21), or to any
of the 5U Rack-mount Kits.
DW063B
Required External SCSI
Cables
- Required
cables needed to
connect the
enclosure/drives to the
host(s). Once cable per
bus is needed.
VHDCI/Wide 12 Ft. Cable 68-pin HD to 68-pin
NOTE:
For SE and LVD SCSI tape devices.
341177-B21
Optional External SAS
Cable
HP 1U SAS TP I-E 3HDDs X 1Tape Drive X4M Server Cable Assembly Kit
NOTE:
This cable is needed to connect SAS enclosure/drives to the
motherboard on certain servers. See
http://www.hp.com/storage/SPOCK
for
support details.
AE464A
HP SAS MIN-MIN 3X1X-5M Cable Assembly Kit
NOTE:
This cable is required to connect SAS enclosure/drives to the
motherboard on HP ProLiant DL360G5 and DL365G5 SAS servers
AG452A
HP 1U SAS Ext-Min 1x-4M 8088/8470 Cable Assembly Kit
NOTE:
This cable is needed to connect to SAS SC44Ge HBA external port on
server
AE468A
HP SAS External-Min 1x-2M 8088/8470 Cable Assembly Kit
NOTE:
This cable is used to connect to SAS SC44Ge HBA external port on
server
AE466A
HP SAS Min-Min 1x-2M (8088) Cable Assembly Kit
NOTE:
This cable is used to connect to SAS HBA mini-SAS external port on
server (e.g., P212, P411, P800 Smart Array Controllers)
AE470A
HP SAS MIN-MIN 1X-4M (8088) Cable Assembly Kit
NOTE:
This cable is used to connect to SAS HBA mini-SAS external port on
server (e.g., P212, P411, P800 Smart Array Controllers)
AE465A
HP 2m External Mini-SAS (8088) to 4x1 Mini-SAS Cable
NOTE:
This cable is used to connect up to 4 SAS tape drives to one SAS HBA
mini-SAS external port on server (e.g., P212, P411, P800 Smart Array
Controllers)
AN975A
HP 4m External Mini-SAS (8088) to 4x1 Mini-SAS Cable
NOTE:
This cable is used to connect up to 4 SAS tape drives to one SAS HBA
mini-SAS external port on server (e.g., P212, P411, P800 Smart Array
Controllers)
AN976A
QuickSpecs
HP Rack-mount Kits
Configuration Information
DA - 10854 Worldwide QuickSpecs — Version 65 — 10.5.2012
Page 12