Specifications

professional serieS (1p/1p) - Tower
#1 : Based on load percentage 100%~80%/ 80%~70%/ 70%~60%/ 60%~0%.
L means Long-run model; S means Standard model; I means Isolation Transformer available (optional).
Symbols: / meant for OR; × meant for Multiply of.
All specifications, designs and contents are subjected to changes without prior notice.
• True Double-Conversion Online UPS
• Wide input voltage range (110~300VAC)
• Input Power Factor correction 0.98
• Output Power Factor 0.80
• Generator compatible
• LCD User Interface
• RS-232 communication port or mini slot for USB / RS-232 / AS400 /
SNMP communication
• Smart battery charger design for optimized battery performance
• Optional isolation transformer available
PRO901S/L PRO902S/L PRO903S/L
168/148/128/118VAC ±5% or 84/74/64/54VAC ±5%
#1
160/140/120/110VAC ±5% or 80/70/60/50VAC ±5%
#1
208/220/230/240VAC or 110/115/120/127VAC
208/220/230/240VAC
Input AC Voltage
Voltage Range
Low Line Transfer
Low Line Comeback
Low Line Comeback
(Auto Restart)
300VAC ±5% or 150VAC ±5%High Line Transfer 280VAC ±5%
290VAC ±5% or 145VAC ±5%High Line Comeback 270VAC ±5%
183/158/138/118VAC ±5%
#1
175/150/130/110VAC ±5%
#1
168VAC ±5% or 84VAC ±5% (80%~ 100% Load)
148VAC ±5% or 74VAC ±5% (0%~ 80% Load)
180VAC ±5% (80%~ 100% Load)
155VAC ±5% (0%~ 80% Load)
INPUT
MODELS
Full specifications
PRO906 (S/L/SI/LI)
6000 VA
4200 W
Optional
Single Phase In / Single Phase Out
Capacity
Phase
Isolation Transformer
Volt-Amp
Watt
PRO901 (S/L/SI/LI)
1000 VA
800 W
PRO902 (S/L/SI/LI)
2000 VA
1600 W
PRO903 (S/L/SI/LI)
3000 VA
2400 W
≧ 0.98
40~70Hz (Auto Sensing)Frequency Range
Power Factor Correction
OUTPUT
≧ 0.95≧ 0.99
12V9AHBattery Type
Numbers
Typical Recharge Time
Charging Current (max.)
Charging Voltage
BATTERY
Standard Model
Sounding every seconds
Sounding twice every seconds
Sounding every 4 seconds
Continuously sounding
397×145×220
397×140×220
17.2
8.9
421×190×318
421×190×318
28.8
13.5
426×190×318
426×190×318
35.3
14.3
MANAGEMENT
20-90% Relative Humidity @ 0~40°C (Non-Condensing)
Less than 45dB @ 1 Meter Less than 55dB @ 1 Meter
Humidity
Noise Level
EN 62040-2:2006, EN 61000-3-2:2006+A1:2009+A2:2009, EN 61000-3-3:2008
Regulations
Support Windows® 2000/2003/XP/Vista/2008, Windows® 7, Linux, Unix and MAC
Smart RS232
ENVIRONMENT
UPS Status, Load Level, Battery Level, Input/Output Voltage, Discharge Timer, Fault Conditions
INDICATORS
LCD Panel
ALARM
Battery Mode
Low Battery
Overload
Fault
PHYSICAL
400×146×205
9.3
400×146×205
4.8
Dimension (mm) D×W×H
Net Weight (kgs)
Dimension (mm) D×W×H
Net Weight (kgs)
Standard Model
Long-Run Model
EFFICIENCY
AC Mode
Battery Mode
≦3% THD
≦6% THD
±1%
3:1
AC Mode to Battery Mode
Synchronized Range
Battery Mode
Inverter to Bypass
Linear Load
Non-Linear Load
±3%AC Voltage Regulation (Battery Mode)
Frequency Range
Current Crest Ratio
Harmonic Distortion
Transfer Time
Waveform (Battery Mode)
Power Factor
1A
9 hours recover to 90% capacity
50Hz ±0.25Hz or 60Hz ±0.3Hz
Zero
47~53Hz or 57~63Hz
4ms (Typical)
Pure Sinewave
0.8
2
27.4VDC ±1%
88.5%
83.7%
≦3% THD
≦6% THD
4
54.7VDC ±1%
89.3%
88.2%
≦4% THD
≦7% THD
6
82.1VDC ±1%
87%
85%
12V10AH
8
109.4VDC ±1%
90%
85%
Depending on applicationsBattery Type
Numbers
Long-Run Model
Charging Current (max.)
Charging Voltage 27.4VDC ±1%
1A/5A
2
54.7VDC ±1%
1A/2A/4A/8A
4
82.1VDC ±1%
4A/8A
6
109.4VDC ±1%
4A/8A, 10A (Optional)
8
208/220/230/240VAC or 110/115/120/127VACOutput AC Voltage
OnlinE UPS
3
Online