Specifications

PCC Series
PCC Series Models:
• Intelligent Maximum Power Point Tracking technology
• Built-in DSP controller with high performance
• Automatic battery voltage detection
• Three-stage charging optimizes battery performance
• Auto load-detection
• Multifunction LCD displays detailed information
• Reverse polarity protection of solar panel and battery
• Overcharge and overload protection
• IP 43 protection for outdoor and harsh environment
#1
• IP 21 protection
#2
• Suitable for battery types of sealed lead acid, vented Gel, and NiCd
• Standard RJ45 port or optional RS-485 communication port for remote monitoring
Standalone solar power system
External battery packs
Solar panel
SCC-MPPT
Inverter
Home appliances
Combined MPPT technology and DSP controller, PCC Series will convert best voltage to
charge battery based on varied temperature. Compared to traditional solar charge controller,
it allows your solar panels to operate at their optimum power output voltage, providing
higher efficiency up to 97.8%with lower power loss.
Integrated PCC Series with inverter, solar panel, and external battery packs, it will become a
standalone solar power system to generate green power for your home appliances. PCC
Series will convert solar power to charge external batteries, and then provide power to home
appliances via inverter.
SPECIFICATION
MODEL
INDICATORS
LCD Panel
LED Display
PROTECTIONS
Overload Protection
Overcharge Protection
Polarity Reversal Protection @ Solar Cell & Battery
INPUT
Maximum PV Array Open Circuit Voltage
MPPT Range @ Operating Voltage
Maximum Current
OUTPUT
Nominal Battery Voltage
Connected Battery Type
Maximum Charging Current
Ripple Voltage
Maximum Efficiency
Standby Power Consumption
Charging Method
PHYSICAL
Dimension (mm) D×W×H
Net Weight (kgs)
Connector
Type of Mechanical Protection
ENVIRONMENT
Humidity
Operating Temperature
Storage Temperature
Altitude
PCC 300
15~33V @ 12V
50V
12V
1W
135×170×57.5
0.92kgs
Three indiators:
Solar, Charging & Load Status
> 110%: Audiable Alarm
Yes
18A
25A
<±1V
97.8%
IP43
PCC 600
30~66V @ 24V
75V
24V
LCD Panel indicating Solar Power, Output Power, Battery Voltage, Charging Current,
and Fault Conditions
Yes
Sealed Lead Acid, Vented, Gel, NiCd Battery
Three Stages: Bulk, Absorption & Floating
220×170×57.5
1.85kgs
Input or Output Terminal Block
0~90% Relative Humidity (Non-Condensing)
-20°C to 55°C
-40°C to 75°C
0~3000m
PCC 3000
Three indicators:
Solar, Battery & Wiring Fault
60~132VDC
150VDC
Capacity 300W 600W 3000W
Yes
45A
48V
60A
98%
2W
180×210×80
1.28
IP21
Solar
#1 Only applicable to Model with 50~300W. #2 Only applicable to Model with 3000W.
All specifications, designs and contents are subjected to changes without prior notice.
solar
28