Specifications

POWER series (3p/3p) - PWR1000
Full specifications
RP Series UPS Modules
PHYSICAL
RP Series UPS Rack
RP Series UPS Modules
RP Series UPS Rack
Dimension (mm)
D×W×H
Net Weight (kgs)
31
250
493×709×132
600×1022×2100
Noise Level
ENVIRONMENT
<60dB
Temperature
Humidiy
0°C~40°C
0%~ 93% (Non-Condensing)
Storage Temperature -25°C~55°C
OUTPUT
Frequency
Same as Input (AC mode), when AC frequency over
Step ±8%, output frequency 50×(1±0.5%)Hz
50×(1±0.5%)Hz (Battery Mode)
3 Phases, 4 Wires + GND
380VAC ±2%
Connection
Rated Voltage
INPUT
Frequency Range
Power Factor
40~70Hz
> 0.99
380VAC ±15%
3 Phases, 4 Wires + GND
240~520VAC
Connection
Voltage Range
Bypass Voltage Range
MODELS
15~120KVA
12~96KW
15-120KVA/12-96W
3-Phase In / 3-Phase Out
Capacity
Phase
Isolation Transformer
Volt-Amp
Watt
NA
Generator Compatible
Communication Interface
Single Module Power
Output Power
Nominal External Battery Voltage
±240VDC (every group has forty batteries in series)
Connection, fetch out midline among them
110%< Load < 130%, after 10mins, transfer to bypass
130%< Load < 150%, after 1mins, transfer to bypass
Load > 150%, only 0.5secs, transfer to bypass
Power Factor 0.8
15KVA / 12KW
15KVA×Modules / 12KW×Modules
Yes
RS232, RS485, Intelligent Slot
Overload Capability
• Optimization Topology of power supply systems
• Sharing battery in parallel mode
• Free setting of charging current
• Intelligent monitoring function
• Small and medium-sized distribution system
• Maintenance bypass
• Multi-function UPS
• EPO function
• Three phase in, three phases out
• Digital control
• 19 inch standard cabinet and 5 inch LCD screen
• Modularization design (each module is 15KVA)
• Max power density in UPS Field
• N + X parallel redundancy
• Flexibility of parallel redundancy setting
• Parallel redundancy function of control systems
Accord with International EMC safety regulate:
(1) EMS - IEC61000-4-2 (ESD) : Electrostatic Discharge, IEC61000-4-2 (RS) : Radiated Immunity, IEC61000-4-2 (EFT) : Electrical Fast Transients cc, IEC61000-4-2 (Surge) : Surge Immunity
(2) EMI - In IEC62040-2, which about UPS EMC output require >25A.
All specifications, designs and contents are subjected to changes without prior notice.
OnlinE UPS
21
Online