Specifications

INPUT
Power Factor
THDi
Frequency Range
Voltage Range
Low Line Transfer
176VAC (Phase Voltage) ±3% @ 100% Load
110VAC (Phase Voltage) ±3% @ 50% Load
Low Line Comeback
186VAC (Phase Voltage) ±3% @ 100% Load
120VAC (Phase Voltage) ±3% @ 50% Load
High Line Transfer 300VAC (Phase Voltage) ±3%
High Line Comeback 290VAC (Phase Voltage) ±3%
≧ 0.99 @ 100% Load
< 6% @ 100% Load
46~54Hz or 56~64Hz
≦5% THD
Frequency Range
Harmonic Distortion
Transfer Time
AC Mode to Battery Mode
Synchronized Range
Battery Mode
Inverter to Bypass
Linear Load
Non-Linear Load
AC Voltage Regulation (Battery Mode)
Output Voltage
Current Crest Ratio
Waveform (Battery Mode)
Power Factor
≦2% THD
OUTPUT
50Hz ±0.1Hz or 60Hz ±0.1Hz
±1%
3 × 400v (3Ph+N)
46~54Hz or 56~64Hz
3:1 (Max.)
Zero
Zero
Pure Sinewave
0.8
• True double-conversion
• DSP technology guarantees high performance
• Output Power Factor 0.8
• Wide input voltage range
• Active power factor correction in all phases
• 50Hz/60Hz frequency converter mode
• Eco mode operation for energy saving (ECO)
• Accepts dual power inputs
• Emergency power off function (EPO)
• Generator compatible
• SNMP+USB+RS-232 multiple communications
• 3-stage extendable charging design for optimized battery performance
• Adjustable battery numbers
• Maintenance bypass available
• Optional N+X parallel redundancy
• Optional isolation transformer offers full isolation and complete common
mode noise
Master Series (3P/3P) - TOWER
Full specifications
MODELS
Phase
Volt-Amp
Watt
Capacity
3 Phase In / 3 Phase Out
Indications of Models: L means Long-run model; S means Standard model; I means Isolation Transformer available (optional).
All specifications, designs and contents are subjected to changes without prior notice.
OnlinE UPS
16
Online
Isolation Transformer Optional
20pcs × 2 strings (18-20pcs adjustable)
89%
Overload
Fault
AC Mode
Battery Type
Numbers
Typical Recharge Time
Charging Current (max.)
Charging Voltage
Battery Type
Numbers
BATTERY
Standard Model
Long-Run Model
9 hours recover to 90%capacity
Charging Current (max.)
Charging Voltage
INDICATORS
LCD Panel
ALARM
Battery Mode
Low Battery
PHYSICAL
Standard Model
EFFICIENCY
Battery Mode
13.65DC ±1% per Battery
13.65DC ±1% per Battery
12V9AH
UPS Status, Load Level, Battery Level, Input/Output Voltage, Discharge Timer, Fault Conditions
Depending on the capacity of external batteries.
Sounding every seconds
Sounding twice every seconds
Sounding every 4 seconds
Continuously sounding
Dimension (mm) D×W×H
Long-Run Model
Dimension (mm) D×W×H
Net Weight (kgs)
Humidity
Noise Level
ENVIRONMENT
0-95% Relative Humidity @ 0~40°C (Non-Condensing)
Smart RS232 / USB
MANAGEMENT
Support Windows® 2000/2003/XP/Vista/2008, Windows® 7, Linux, Unix and MAC
Net Weight (kgs)
10000 VA
8000 W
PRO83310 (S/L/LI)
1A
20pcs (18-20pcs adjustable)
4A
86%
592×250×576
Less than 58dB @ 1 Meter
592×250×576
28
83
20000 VA
16000 W
PRO83320 (S/L/LI)
2A
8A
87%
Less than 60dB @ 1 Meter
592×250×576
40
815×250×826
164
Protection IP20
Regulations EN 62040-2:2006, EN61000-2-2:2002, EN 61000-4