www.rackmountsolutions.net 1-866-207-6631 sales@rackmountsolutions.
CV-S801 / CV-S1601 USB DB-15 KVM Installation screw A: M3.2 x 4.5 mm A B iew rV be Cy screw B: M4 x 10 mm ■ Install each bracket using screws provided shown in Figure 1. ■ Fix the KVM into the rack Figure 1. Installing the bracket to the KVM. iew rV be Cy Figure 2. Fixing the KVM into the rack.
CV-S801 / CV-S1601 USB DB-15 KVM Package Content 1 5 al User Manu 2 3 4 1 KVM switch x 1 pc 2 Screw M3.2 x 4.
CV-S801 / CV-S1601 USB DB-15 KVM Connection CV-S801 Local Console Cascade CV-S1601 Connection Rackmount KVM CB-6 KVM cable Connection KVM modules back CB-6 KVM cable
CV-S801 / CV-S1601 USB DB-15 KVM Cascade ■ ■ With the CV-S801 cascade up to 120 servers. With the CV-S1601 cascade up to 128 servers.
KVM Membranes Power ON ■ Turn off all servers and KVM switches ■ Make sure all cables / connectors are properly connected ■ Recommend Power ON sequence is monitor, KVM switch finally computer Front Panel - Port LED Indications 8 ports Online Channel Selected Channel Bank Button 16 ports Channel Select Button Shift Bank Button No.
Password Password for CV-S801 / CV-S1601 The password is disabled by default (i.e. There is no password required when you power on the KVM switch for the first time) ■ Enable password 1. Call KVM OSD menu by pressing the KVM hotkey Scroll Lock + Scroll Lock + Space Bar 2. Select “06 PASSWORD” 3. Select ENABLE 4. Reset the KVM by pressing Bank button & channel select button on the KVM membrane at the same time 5.
KVM OSD OSD Menu for CV-S801 / CV-S1601 MAIN CONTROLS ENTER A CHOICE: 01 LANGUAGE 02 PORTNAME 03 TIMEVIEW 04 SECURITY 05 FINDPORT 06 PASSWORD 07 CONSOLE ?X 01 LANGUAGE OSD language change 02 PORT NAME Define port name 03 TIME VIEW Change OSD TIME / SCAN TIME 04 SECURITY Change password 05 FIND PORT Find the system by its name 06 PASSWORD Enable / Disable the password 07 CONSOLE Enable - quit the OSD menu without password Disable - password is requested while quitting the OSD menu
KVM Hotkey Hotkey for CV-S801 / CV-S1601 Hotkey Function Scroll Lock + Scroll Lock + Space Bar Calling OSD menu Scroll Lock + Scroll Lock + Switch to previous port Scroll Lock + Scroll Lock + Switch to next port Scroll Lock + Scroll Lock + PgUp Switch to previous bank Scroll Lock + Scroll Lock + Bank no. + Port no.
Optional Accessories 1. USB 2-in-1 KVM cable 1.1 CB-6 6 feet 1.2 CB-10 10 feet 1.3 CB-15 15 feet 2. USB KVM cascade cable 2.1 CBC-6 6 feet 3. Power cord 3.1 IEC power cord 3.2 NEMA 5-15 power cord (US) 3.3 BS 1363 power cord (UK) 3.4 CEE 7/4 power cord (German) 3.
DC Power 12V, 24V, 48V Input Model 12V 24V 48V Input voltage: 12-Volt 24-Volt 48-Volt Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V - No load 50 mA 50 mA 50 mA - Full load 4950 mA 2450 mA 1220 mA Output voltage: 12-Volt 12-Volt 12-Volt Output current: 4.16A 4.16A 4.
Specification CV-S801 / CV-S1601 ▀ ▀ ▀ KVM Port Number of ports: 8 or 16 Connector: HDDB 15-pin Connectivity: CB-6 / 10 / 15 6' / 10' / 15' 2-in-1 USB KVM cable Local Console Graphic connector: HDDB15-pin VGA Resolution: Up to 1920 x 1440 Bandwidth 200MHz Input device: 2 x USB type A for keyboard & mouse On Screen Display Port name: Up to 10 characters long Port select: Front membrane button, Hotkey & On screen menu Security: Support eight character password Auto scan: 5~99 seconds
FAQ General 1. How do the KVM switches allow the user to switch ports? There are two ways to switch ports. One is the membrane buttons on the front and the other way is with Hot-key commands. 2. What operating systems do the KVMs support? The KVMs support multi-platform support allows you to control Windows-based computers, Sun Solaris systems, Linux, or even Macs by a single KVM switch.
FAQ 10. The server VGA resolution does not match the resolution of monitor ? The KVM supports DDC function which will dynamically detect and the DDC data. The problem may come from the power on sequence. For KVM switch The recommended power on sequence is - monitor, KVM switch and then servers. For remote console box It supports DDC function but does not support hot-plug, the recommend power on se quence is – monitor, remote console box and then servers.
Troubleshooting 1. There is no LED display on KVM membrane switch i. Make sure the power adapter plugged into the KVM Switch, if the LED’s still off, perform soft reset to KVM switch. ii. Power cycle KVM switch. 2. I can power on the KVM, but I am not getting any picture at all, how can I solve this? Switching to another port and checking if this port has the same problem a. If you switch to another port, please check the screen resolution is the same. b.
