User manual

Rev. : 1.0

P.10

Installation Steps

Before installation, please make sure all of peripherals and computers have

been turned off.

1. Connect the CD-6 3-in-1KVM cable with 2 x mini-din 6-pin connectors

and a HDDB 15-pin connector to the computer ports.

2. Connect another end of the cable to KVM switch.

3. Connect a keyboard, mouse and monitor to the console port of the

switch.

4. Plug the power adapter included to the switch.

5. After powering on computers and finishing the boot-up process, you can

start the PS/2 KVM switch.

Note: Please don’t switch the PC port (i.e. Don’t press the push button of KVM switch

or run hot key) during the computers are under boot-up.

VGA Monitor

3-in-1 Cable (CD-6)

DC Adapter

PS/2 Keyboard

PS/2 Mouse

CV-401 / CV-801 / CV-1601 User Manual

10. KVM Session