www.rackmountsolutions.net 1-866-207-6631 sales@rackmountsolutions.
CV-401 / CV-801 / CV-1601 PS/2 DB-15 KVM Installation screw A: M3.2 x 4.5 mm A B iew rV be Cy screw B: M4 x 10 mm ■ Install each bracket using screws provided shown in Figure 1. ■ Fix the KVM into the rack Figure 1. Installing the bracket to the KVM. iew rV be Cy Figure 2. Fixing the KVM into the rack.
CV-401 / CV-801 / CV-1601 PS/2 DB-15 KVM Package Content (only for rackmount KVM) 1 5 al User Manu 2 3 4 1 KVM switch x 1 pc 2 Screw M3.2 x 4.
CV-401 / CV-801 / CV-1601 PS/2 DB-15 KVM Connection CV-401 Local Console Cascade CV-801 CV-1601 Connection Rackmount KVM CD-6 KVM cable Connection KVM modules back CD-6 KVM cable
CV-401 / CV-801 / CV-1601 PS/2 DB-15 KVM Cascade ■ ■ With the CV-401 cascade up to 116 servers. With the CV-801 cascade up to 120 servers. With the CV-1601 cascade up to 128 servers.
KVM Membranes Power ON ■ Turn off all servers and KVM switches ■ Make sure all cables / connectors are properly connected ■ Recommend Power ON sequence is monitor, KVM switch finally computer Front Panel - Port LED Indications 4 ports (only for CV-401) 8 ports Online Channel Selected Channel Bank Button 16 ports Channel Select Button Shift Bank Button No.
Password Password for CV-401 / CV-801 / CV-1601 The password is enabled by default, the default password is “00000000” eight zeros (Do not use “0” on number pad) ■ Set your own user name & password 1. Call KVM OSD menu by pressing the KVM hotkey Scroll Lock + Scroll 2. Select “CHANGE PASSWORD” 3. Enter “00000000” eight zeros in password field (Do not use “0” on number pad) 4. Set your own password in “ENTER NEW PASSWORD” field 5.
KVM OSD OSD Menu for CV-401 / CV-801 / CV-1601 OSD operation next to the system name The PC is powered on next to the system name The PC is selected OSD OSD menu on screen time SCAN Scan interval from one PC port to next PC when applying auto scan CHANGE PASSWORD Change to a new password Console ON/OFF ON - quit the OSD menu without password OFF - password is requested while quitting the OSD menu ESC QUIT TAB NEXT Select port for destination PC name and press “Enter” to select PgUp / PgDn
KVM Hotkey Hotkey for CV-401 / CV-801 / CV-1601 Hotkey Function Scroll Lock + Scroll Lock + Space Bar Calling OSD menu Scroll Lock + Scroll Lock + Switch to previous port Scroll Lock + Scroll Lock + Switch to next port Scroll Lock + Scroll Lock + PgUp Switch to previous bank Scroll Lock + Scroll Lock + Bank no. + Port no.
Optional Accessories 1. PS/2 3-in-1 KVM cable 1.1 CD-6 6 feet 1.2 CD-10 10 feet 1.3 CD-15 15 feet 1.4 CD-33 33 feet 2. USB 2-in-1 KVM cable 2.1 CB-6 6 feet 2.2 CB-10 10 feet 2.3 CB-15 15 feet 3. PS/2 KVM cascade cable 3.1 CA-2 2 feet 3.2 CA-6 6 feet 3.3 CA-10 10 feet 3.4 CA-15 15 feet 4. USB KVM cascade cable 4.1 CBC-6 6 feet 5. SUN / iMAC USB to PS/2 adapter 5.1 SUN-31 kit 5. Power cord 5.1 IEC power cord 5.2 NEMA 5-15 power cord (US) 5.3 BS 1363 power cord (UK) 5.
DC Power 12V, 24V, 48V Input Model 12V 24V 48V Input voltage: 12-Volt 24-Volt 48-Volt Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V - No load 50 mA 50 mA 50 mA - Full load 4950 mA 2450 mA 1220 mA Output voltage: 12-Volt 12-Volt 12-Volt Output current: 4.16A 4.16A 4.
Speci?cation CV-401 / CV-801 / CV-1601 ▀ ▀ ▀ KVM Port Number of ports: 4 or 8 or 16 Connector: HDDB 15-pin Connectivity: CD-6 / 10 / 15 / 33 6' / 10' / 15' / 33' 3-in-1 PS/2 KVM cable Console Graphic connector: HDDB15-pin VGA Resolution: Up to 1920 x 1440 Bandwidth 200MHz Input device: PS/2 mini-din 6-pin mouse, PS/2 mini-din 6-pin keyboard On Screen Display Port name: Up to 10 characters long Port select: Front membrane button, Hotkey & On screen menu Security: Support eight characte
FAQ General 1. How do the KVM switches allow the user to switch ports? There are two ways to switch ports. One is the membrane buttons on the front and the other way is with Hot-key commands. 2. What operating systems do the KVMs support? The KVMs support multi-platform support allows you to control Windows-based computers, Sun Solaris systems, Linux, or even Macs by a single KVM switch.
Chapter 10 FAQ 10. The server VGA resolution does not match the resolution of monitor ? The KVM supports DDC function which will dynamically detect and the DDC data. The problem may come from the power on sequence. For KVM switch The recommended power on sequence is - monitor, KVM switch and then servers. For remote console box It supports DDC function but does not support hot-plug, the recommend power on se quence is – monitor, remote console box and then servers.
Troubleshooting 1. There is no LED display on KVM membrane switch i. Make sure the power adapter plugged into the KVM Switch, if the LED’s still off, perform soft reset to KVM switch. ii. Power cycle KVM switch. 2. I can power on the KVM, but I am not getting any picture at all, how can I solve this? Switching to another port and checking if this port has the same problem a. If you switch to another port, please check the screen resolution is the same. b.
