User manual

Rev. : 1.0

P.11

CV-S801 / S1601 User Manual

11. KVM Session

Installation Steps

Before installation, please make sure all computers are turned on and its

operating system are running properly with keyboard and mouse.

1. Connect the 2-in-1KVM cable to the one of your server.

● USB Type A Male connector to the USB Port

● HDDB 15-pin Male connector to the VGA Port

2. Plug the power adapter included to the switch.

3. Connect USB keyboard and mouse the console port of the switch.

4. Connect the another end of the 2-in-1 cable to the USB KVM switch

5. Connect a monitor to the console port of the USN KVM Switch.

6. Reset USB KVM Switch by membrane

Power

. . . . . . .