User Manual CV-S801 / S1601 1U Rackmount USB KVM Switch
CV-S801 / S1601 User Manual 1. Table Of Content 1. Table of Content P.1 2. Read Before Installation P.2 3. Introduction P.3 4. Features P.3 5. Package Contents P.4 6. Optional Accessories P.5 7. Peripheral products P.5 8. Important Safeguard P.6 9. Structure Diagram P.7 10. Dimension Diagram P.8 11. KVM Session Front View Rear View Installation Steps Cascading 12. Start Up P.13 Hot Key Command Hot Key Operation OSD Operation Rev. : 0.1 P.9 P.10 P.11 P.12 P.13 P.
2. Read Before Installation Technical Notes For Windows 98/98 SE systems ● HID (Human Interface Device) driver must be installed prior to using the USB KVM switch. To install the HID driver, first connect a USB keyboard and mice directly to computer (before installing KVM switch) then follow the Windows installation instructions, this will install the HID device driver and allow the use of the KVM switch. Note : Failure to do so may result in Windows not being able to detect keyboard and mouse.
CV-S801 / S1601 User Manual 3. Introduction As the server density increases, you run out of spaces in racks and server room quickly. CV Series USB KVM Switch is slim 1U form factor to provide effective assistant for an administrator to control multiple PCs All models are OSD (On-Screen-Display) menu equipped to simply the server management. It fit different applications and can be cascaded together expanding the capacity up to 128 computers, and providing the maximum flexibility. 4.
CV-S801 / S1601 User Manual 5. Package Contents USB KVM Switch 1 Pieces User’s manual 1 Pieces DC Power Adapter 1 Pieces 19” Mounting Bracket 1 Pair Before Unpacking It is very important to locate the USB KVM switch in a suitable environment. 1. The surface for placing and fixing USB KVM switch should be stable and level or mounted into a suitable cabinet. 2.
CV-S801 / S1601 User Manual 6. Optional Accessories KVM Cable CB-6 / 10 / 15 6ft / 10ft / 15ft PS/2 3-in-1 cable Cascade Cable ???? 7. Rev. : 1.0 Peripheral Products Model Description CV-S101 CAT.5 USB KVM extender RP115 1U 15” LCD Monitor Drawer RP 615 / 717 / 819 6U(15") / 7U(17") / 8U(19") LCD Monitor RKP115 1U LCD Keyboard Drawer P.
CV-S801 / S1601 User Manual 8. Important Safeguards Please read all of these instructions carefully before you use the device. Save this manual for future reference. ● Unplug the USB KVM switch from the power outlet before cleaning. ● Do not spray liquid cleaners or aerosol directly on the device. Wet a cloth with a neutral detergent (e.g. clean water) and squeeze it tight, then clean the screen slightly with it. ● Do not expose the USB KVM switch directly to rain, water, moisture or sunlight.
CV-S801 / S1601 User Manual 9. Structure Diagram • ƒ „ 1. USB KVM Switch 2. Cable Mounting Kit 3. 19” Mounting Kit 4. KVM Membrane Rev. : 1.0 P.
CV-S801 / S1601 User Manual 10. Dimension Diagram CV-S801 / CV-S1601 Rev. : 1.0 P.
CV-S801 / S1601 User Manual 11. KVM Session Front View Bank No. Selected Channel Online Channel Channel Select Button Bank Button Shift Button LED Indication Selected Channel - Displayed channel on monitor & red in LED. Channel select button - Press to select channel from 1 – 8. Rev. : 1.0 Shift button - Press & Hold follow with a channel button to select channel from 9 – 16. Online Channel - Green LED state the PC has connected and power on. Bank No.. - Display the Bank no. from 1 – 8.
CV-S801 / S1601 User Manual 11. KVM Session Rear View DC Cascade Console Power Port Port Channel Port USB Port CV-S801 CV-S1601 Rev. : 1.0 DC Power - connect to external 12V DC power adapter. Cascade Port - connect to additional KVM switch for channel expansion. Console Port - connect to monitor, PS/2 keyboard & mouse. Channel Port - connect to PC computer with CD-6 3-in-1 KVM cable. USB Port - connect to USB mouse & keyboard P.
CV-S801 / S1601 User Manual 11. KVM Session Installation Steps Before installation, please make sure all computers are turned on and its operating system are running properly with keyboard and mouse. 1. 2. Connect the 2-in-1KVM cable to the one of your server. ● USB Type A Male connector to the USB Port ● HDDB 15-pin Male connector to the VGA Port Plug the power adapter included to the switch. DC Power 3. Connect USB keyboard and mouse the console port of the switch. 4.
CV-S801 / S1601 User Manual 11. KVM Session Cascading Using USB KVM cable to connect from Bank 1’s “Cascade port” to Bank 2’s “Console port”. After connected please press “Bank” & “Channel” button on the front of the USB KVM switch to reset the KVM switch. Bank 1 Bank 2 Bank 8 (Max.) USB Cascade cable USB Cascade cable Cascade level Max. : 8 level Rev. : 1.0 ● Max. PC connection is 128 or with additional 122 PCs. ● All USB KVM switch is compatible & can cascade with each other.
CV-S801 / S1601 User Manual 12. Start Up 1. The channels that have PC connected and it is switch on will have a green LED on that channel. 2. The red LED will indicate the selected channel. 3. 7 segments LED will display the bank number. 4. Press channel button to select the channel. 5. Enter the password, default is “00000000” eight zeros. Otherwise the keyboard & mouse will be locked. 6. If you forget your password, send back to Manufacturer. Hot Key Command Rev. : 1.
CV-S801 / S1601 User Manual 12. Start Up Hot-key Command Operation 1. Calling OSD Menu Scroll 2. £ + Scroll + ¤ + Switch to Previous Bank Scroll 5. Scroll + Switch to Next Power On Port (powered on PC only) Scroll 4. Space Bar + Switch to Previous Port (powered on PC only) Scroll 3. Scroll + Scroll + First digit of Port Number: 0 for Port 0-9 1 for Port 10Second digit of port Number Pg Up + Switch to Specific Port Scroll Scroll + Bank 1~8 + No. 0 or 1 + No.
CV-S801 / S1601 User Manual 12. Start Up HotKey Command Operation 6. Switch to Next Bank Scroll 7. + Scroll + PgDn Enable / Disable beeper sound Scroll + Scroll B + Note: The default Beeper function is ON and beeper control is only for 8. Auto Scan for Powered on PC Scroll 9. + Scroll S + Reset to factory Default Setting Scroll + Scroll R + ROM REFLASH Note: Not available for password reset. 10.
CV-S801 / S1601 User Manual 12. Start Up OSD Operation Note: When using the keyboard arrow key to move the cursor, the keypad arrow key (Up, Down, Right, Left) is unable to work at this menu. 1. “MAIN CONTROLS” - OSD Menu of USB KVM switch ● To pop up MAIN CONTROLS—OSD menu of USB KVM switch, please use hot keys command . ● To operate MAIN CONTROLS, please use keyboard and mouse. ● ● ◇ Mouse Operating: You may also simply use mouse, twice clicking left button, to choose a category.
CV-S801 / S1601 User Manual 12. Start Up LANGUAGE Menu LANGUAGE ?X CHOOSE A LANGUAGE : 01 ENGLISH Mouse Operation : ● Move mouse and click the left button to choose a language, and click left key again to save. Keyboard Operation : ● Rev. : 1.0 Press é / ê to choose a language and press ENTER to save. P.
CV-S801 / S1601 User Manual 12. Start Up PORTNAME Menu PORTNAME Bank ?X Bank Session 1 01 SYSTEM 01 02 ☼ SYSTEM 02 03 ☼ SYSTEM 03 04 ☼ SYSTEM 04 05 ☼ SYSTEM 05 06 ☼ SYSTEM 06 07 ☼ SYSTEM 07 08 ☼ SYSTEM 08 09 SYSTEM 09 5 PC Name Session 6 Use “Tab” key to select session like Bank, PC, OSD, SCAN, CHANGE PASSWORD, CONSOLE ON/OFF, etc… Bank Session Use Page Up & Page Down to switch previous or next bank PC Name Session 1.
CV-S801 / S1601 User Manual 12. Start Up TIMEVIEW Menu TIMEVIEW OSD TIME : 10 SCAN 10 1. 2. Rev. : 1.0 ?X : SEC SEC OSD TIME means the display period of OSD windows or PC system name on your monitor. You can modify it from 05 sec to 99 sec. The factory default value is 10 sec... SCAN TIME means the scan interval from one PC port to next PC port. The default SCAN time is 10 sec and the maximum scan time is 99 sec.
CV-S801 / S1601 User Manual 12. Start Up SECURITY Menu SECURITY ?X ENTER PASSWORD ________ ENTER NEW PASSWORD ________ RETYPE NEW PASSWORD ________ ● To CHANGE PASSWORD for avoiding all PC systems to be intruded by the others. The default password is 8 digits “ 00000000 “. ● Please follow the steps below to cahnge the password. 1. Enter the factory default password “00000000” in the first row “ENTER PASSORD” and press the “Enter”. ENTER PASSWORD •••••••• 2.
CV-S801 / S1601 User Manual 12. Start Up FINDPORT Menu FINDPORT ?X ENTER NAME : _ _ _ _ _ _ _ _ _ _ “FINDPORT“ option helps you to find the PC system by its name. ● Enter PC system name and press ENTER, it will search the matching PC system and given the message for searching result.
CV-S801 / S1601 User Manual 12. Start Up CONSOLE Menu CONSOLE ?X ENABLE DISABLE ● ● ● ENABLE – any user can use the console DISABLE – user is not allowed to use the console port, unless password is entered.When password is entered already and pass the KVM switch authentication, the CONSOLE will be set to ENABLE. Default – ENABLE no password is required Note: After finish the usage of KVM switch, please don’t forget to set up CONSOLE ENABLE state to DISABLE state.
CV-S801 / S1601 User Manual 13. FAQ 1. Keyboard or mouse dose not work or not be compatible with the PC. Please make sure the keyboard or mouse works when directly plug into the computer. If the problem persists, please try another keyboard or mouse. 2. Mouse doesn’t work in Auto Scan mode. You can press any key on the keyboard or the front button on the face plate for returning standard mode and then use the Keyboard or Mouse again. 3.
CV-S801 / S1601 User Manual 14. Technical Specifications Item Specification KVM Channel Port CV-S801: 8 port / CV-S1601: 16 port KVM Channel Interface HDDB 15 pin Female USB Port : Type A Female PC Computer Interface Cascade Port Connector HDDB 15pin Female KVM Cable Connection 2-in-1 HDDB 15-pin KVM Cable (CB-6/ 10/ 15) PC selection On Screen Display, Hot Key & Push Button LED Rev. : 1.