Instructions / Assembly

Paintable:

Want a different color? The finish on this pot rack can be spray painted any color. We recommend Rustoleum

“Hammered” colors for their metal-like finishes, however any quality spray-can paint may be used. See a paint retailer for

guidance.

Tools Needed:

Provided: Installation wall anchors, bolts and hex wrench.

You will need: level, tape measure, pencil, drill and 1/8” drill bit, hammer and nail

STEP 1: Location

Decide where you want to place your utensil bar. Consider the height of the wall where the bar will hang, keeping in mind

how far below the bar your pot and utensils will hang.

On the wall (use a level to ensure that the bar is horizontal) mark the two points where the bar will attach. Then tap a

small nail through each mark to be certain a stud is not in the way. (NOTE: because your utensil bar includes toggle an-

chors that can hold 100s of pounds, you DO NOT need to locate and bolt to studs.)

STEP 2: INSTALL DRYWALL ANCHORS

RACK IT UP!’s drywall togglers eliminate the need to bolt your pot rack to a stud. The steel anchors are very strong and

when installed in drywall each drywall anchor holds about 200 lbs. Two anchors hold about 400 lbs., many times the

weight you will likely hang from your pot rack.

See Back of this Booklet for Toggle Instructions.

INSTALL IN WOOD

If you need to install one or both sides of your rack in wood, use as many of the two wall screws (30A) included, but with-

out a red sleeve. See back page of booklet under Step 1.

CLEANING

Your bar has a durable powder coat finish designed to provide years of protection. Cleaning is done easily using soap and

a damp cloth. Dry thoroughly after cleaning.

______________________________________

ACCESSORIES

RACK IT UP by Enclume

Enclume Design Products, Inc.

24 Colwell Street, Port Hadlock WA 98339

TOLL FREE (877) 362-5863

customerservice@enclume.com www.enclume.com

8 Pot Hooks

There’s always a need for extra

hooks. Set of eight hooks

(4 straight, 4 angle). Steel

with powder coat finish for

extra durability.