Instructions / Assembly

How To Attach Long Utensil Bar to Wall
MISSING A PART?
Please call our TOLL FREE SERVICE CENTER 1 [phone]
TIP! FIRST, REMOVE PAINT FROM BOLT HOLES. Because the powder coat finish applied at the
factory also adheres to the inside of bolt holes, pushing a bolt through it during assembly may be difficult.
Therefore, before connecting parts, we recommend that you check to see that bolts slip easily through all
holes. If they do not, carefully clear paint from holes in side bars, ends and arms using a small knife.
SECOND, be certain that barrel nuts and bolts screw together easily BEFORE beginning assembly. Resi-
due from the black finish may cause some bolts to stick a bit, therefore use the two hex wrenches enclosed
(one for each end of the barrel) and screw them together to clear away extra paint.
TIP! SAVE TIME AND HASSLE.
PLEASE READ ENTIRE INSTRUCTIONS BEFORE BEGINNING ASSEMBLY.
ITEM No. QTY
*34 32” Utensil bar 1
INSTALLATION HARDWARE
19C Button head screw 1/” x 20 x 2” 2
25A Pot Hook Straight 6
25B Pot Hook Angled 6
26A 5/32 Hex Wrench 1
27A 1/4” Toggle 2
30A Wood Screw 2