Information Sheet

Step 2: Connect to your Ferret WiFi
1. Turn on your Ferret WiFi camera. The camera power switch is at the
back of the camera under the back cap. The camera will take about
2 seconds to boot and power on.
NOTE: The camera is IP67 rated only when the back cap is in place.
2. On your phone/tablet, turn on WiFi and search for the Ferret WiFi
camera in the WiFi list. The WiFi camera has a built in WiFi hotspot
so no other WiFi network is needed.
NOTE: The camera will not link via Bluetooth – it is WiFi only.
Step 3: Enjoy using your Ferret WiFi and start
saving time & money, working safer & smarter.
Please read the instruction manual for further information.