User guide

VBOX MICRO MANUAL
Page | 19 06 August 2014
Specification
Velocity
Accuracy
0.2 Km/h (averaged over 4 samples)
Units
Km/h or Mph
Maximum update rate
10 Hz
Maximum velocity/ Minimum velocity
1000 Mph/0.1 Km/h
Resolution
0.01 Km/h
Latency
>160ms
Distance
Accuracy
0.05% (<50cm per Km)
Units
Metres / Feet
Maximum update rate
10 Hz
Resolution
1cm
Absolute Positioning
Accuracy
5m 95% CEP**
Height accuracy
10 Metres 95% CEP**
Maximum update rate
10 Hz
Resolution
1 cm
Heading
Resolution
0.01°
Accuracy
0.2°
Time
Resolution
0.01 s
Accuracy
0.1 s (0.01s for results scanned in VBOXTools)
Acceleration
Accuracy
1%
Maximum
4 G
Resolution
0.01 G
Maximum update rate
10 Hz
Inputs
CAN Bus – RLVBMIC01
CAN connection for Racelogic modules only
VCI CAN Input – RLVBMIC01C
Allows the user to log incoming CAN data from other
systems
CAN Bus Outputs
Bit rate
125, 250, 500kbit/s & 1Mbit/s selectable baud rate
Identifier type
Standard 11bit and Extended 29bit 2.0A
Data available
Satellites, UTC time, Latitude, Longitude, Speed, Heading,
Altitude, Vertical velocity, Longitudinal & Lateral
acceleration, Distance since reset
Power
Input Voltage range
6-30V DC
Current
Typically 70mA
Environmental and physical
Weight
Approx 275 grams
Size
105mm x 85 x 30mm
Operating temperature
-10˚C to +60˚C
Storage temperature
-40˚C to +85˚C
** CEP = Circle of Error Probable 95% CEP (Circle Error Probable) means 95% of the time the position readings will
fall within a circle of the stated radius.