User guide

VBOX MICRO MANUAL
Page | 17 06 August 2014
Upgrading the VBOX Micro’s Firmware
Occasionally Racelogic releases new versions of firmware (internal code) for VBOX products, often to
introduce new features. New firmware can be loaded into the VBOX Micro using a computer and the
supplied USB cable.
The latest firmware upgrade (.RUF) file for the VBOX Micro is available from the Racelogic website in the
‘Support’ section.
http://www.velocitybox.co.uk/firmware
If you need the latest file, download it from the website and copy it to your computer.
If you are upgrading the VBOX Micro for the first time (or the first time on the computer being used for the
upgrade), please follow the instructions in the section ‘Using USB’ earlier in this manual before following
the instructions below.
How to Upgrade the Firmware
 Press and hold the ‘◄’ button whilst the power is connected to the VBOX Micro.
 The VBOX Micro will enter ‘Upgrader’ mode, indicated by solid RED ‘COM’ and ‘LOG’ LEDs and a
solid GREEN ‘SAT’ LED.
 Connect the USB cable to the computer.
 Double-click the .RUF firmware upgrade file that you have downloaded from the Racelogic website.
This will automatically run the Upgrader software, in which you can see the progress of the
upgrade.
 At the end of the process disconnect the USB cable and then disconnect and reconnect the power
supply.
If you have any questions regarding the VBOX Micro upgrade procedure, please do not hesitate to contact
[e-mail] .