Instruction manual

- 9 -
12/06/09
OLED Display Manual
About
In this section you can find serial numbers and firmware versions installed in the
OLED and connected VVB unit.
Predictive Lap Timing Settings
Bar Range
This setting alters the amount of +/- time shown on the bar graph during lap prediction. Either 2, 5, 10 or 30 seconds
can be chosen. Press  to when bar range is highlighted to scroll through different time options.
Transfer Ref. Lap to VVB
This feature allows the user to save a reference lap for future use, insert an SD card into the connected VVB unit and
use the menu options shown below. Note that the vehicle must be stationary to make this transfer.
Once this is selected, the following messages show saving has been successful.
There will now be a file named OLED.REF on the SD card which you can save to your PC.
Load Ref.Lap from VVB
To load a reference lap file stored from a previous session, put the desired file onto an SD card and load the card into
VVB. The file must be named OLED.REF and placed in the root directory of the SD card.
Select the menu options as shown below. Note that the vehicle must be stationary to make this transfer.
The messages below indicate that the reference file has loaded correctly.