Instruction manual

- 6 -
12/06/09
OLED Display Manual
Fastest Lap
The difference between the new lap time and the best lap time will be shown with a + or – sign. A ‘–’ is shown when
a faster than best is achieved and a ‘+’ is shown for a slower than best.
Split line display
If split lines have been set inside the OLED display then it will display the split time for between 2 and 20 seconds (as
configured) when the split line is crossed.
Setting a Start/finish line
In the lap timing screen a new start/finish line can be set by pressing the  button. If split lines or a separate finish
are also required, then use the ‘set start finish and splits’ option in the main menu (see ‘Set Start and Splits’ section
for more information).
To cancel, press the ▼button within 5 seconds.
Note: You must be moving >0.5km/h for this function.