Instruction manual

- 14 -
12/06/09
OLED Display Manual
Troubleshooting
See below for possible error messages and causes.
No SD card in VVB
to upload file to.
No reference lap file present on SD card to load into OLED. Make sure
file is called ‘OLED.REF’.
Make sure you are stationary before attempting to load a reference lap.
No serial data being received from VVB. Check scene settings
under serial application is set to OLED. Check connector is in
corrected into ‘SER’ port on PRO/ ‘DATA’ port on 2CAM/ ‘AUX’
port on LITE. Check using lower connector on OLED (DSP04).
Over 50KM away from loaded SF line. Check correct SF line loaded
into VVB.
Stop VVB logging data before attempting to load a reference lap.
No SD card in VVB, so unable to store reference file. Check SD card
correctly inserted.
Predictive Lap Timing does not update, or lap time is fixed on screen.
Check ‘Split time display period’ in MENU is set to 5 seconds.
Also try clearing errors by using the RESET LAPTIMING DATA option.