Instruction manual

- 12 -
12/06/09
OLED Display Manual
Reset Laptiming Data
When this option is highlighted, pressing the  button causes the stored reference lap, lap count and lap times to be
reset. Using this option fully resets Predictive Lap Timing mode.
Clear Start & Splits
When this option is highlighted, pressing the  button clears the start/finish and split lines.
Brightness
To adjust the level of brightness on the display screen, press the  button to move through the 5 different light
levels.
Invert Screen Colour
Selecting this menu option with the  button causes the screen to invert colours.
Use Outline Font
By selecting this option with the  button, the OLED display will use an outline font instead of a solid font.
Memory usage
If the card becomes more than 90% full then a warning screen flashes to indicate the memory card status.
Power Supply
The OLED display can accept a supply voltage in the range of 7 to 30V DC.