User guide

Racelogic Ltd Upgrading Firmware
- 46 -
Upgrading the DriftBox Firmware
It may be necessary in the future for you to perform an upgrade to the firmware inside your
DriftBox to add new features. Connect your DriftBox to the computer onto which you have installed
the DriftBox software.
 Download the upgrade file from the website and save it to your computer.
 Press and hold the MODE button whilst you connect power to your DriftBox.
 This will force the DriftBox into Upgrade mode.
 Connect the USB lead from DriftBox to your computer.
 Double click on the upgrade file, this will auto run the upgrader software.
 If this doesn‟t happen automatically, run the „Upgrader.exe‟ software, which should have
been installed when the installation CD was used, and load in the relevant file.
 If you want to read your SD card through USB directly after this upgrade you will need to
disconnect then reconnect power.