User guide

Racelogic Ltd Laptiming Mode
- 29 -
To Save the lines you have created:
 Ensure the SD card is inserted.
 Press the MENU button to enter the Lap timing menu.
 Highlight the SAVE SPLITS option and press OK
Loading start / finish and split Lines
You can load start and split line information from a file stored on the SD card into your DriftBox. By
default the DriftBox looks for a file it has saved out; DBOX.DSF in the „DATA‟ directory. If no
DBOX.DSF file is found the DriftBox will look for a „DSF‟ directory and display a list of all *.DSF
files in that directory. This facility allows you to keep a library of split lines files on the DriftBox from
multiple test areas or circuits.
To Load a split line file:
 Press the MENU button to enter the Lap timing menu.
 Highlight „START & SPLITS‟ and press OK
 Highlight the „LOAD SPLITS‟ option and press OK
Clearing start / finish and split Lines
This option will erase the split line information from the DriftBox memory, not from the SD card.
Split line information remains in the DriftBox memory until they are either cleared or re-entered,
even if the unit is power cycled.
 Press the MENU button to enter the Lap timing menu.
 Highlight „STARTS & SPLITS‟ and press OK
 Highlight the „CLEAR‟ option and press OK
Recording and Reviewing Lap and Split Times
To record your run data and lap and split times, simply insert a SD card into DriftBox, the run data
will be recorded in a „.dbn‟ file on the SD card and the Lap Time information will be recorded in a
text file e.g. „Laps-01‟.txt‟
Using DriftBox to review lap times
To review a „Laps-xx.txt‟ file with lap and split time data:
 Enter Lap Timing Mode and then press the OK button.
 DriftBox will then display any Lap Timing files stored on the card:
 Press the ▲▼buttons to scroll to the required file, then press the OK button to select it.
The file will then be displayed in DriftBox: