User guide

Racelogic Ltd Laptiming Mode
- 25 -
Lap Count
A count of the number of completed Laps is displayed in the top left corner of the Lap timing
screen.
To reset the Lap count and the Best Lap time, press the RESET button.
Lap Timing Including Split Points
This method allows for the setting of a start/finish line, up to six split points, and a separate finish
line if the course being driven is of a sprint or hill-climb type. Due to the fact that it requires several
button pushes it is best employed in a non-race session.
 Firstly set the start/finish line and splits or load a previously saved set from the SD card
(see Setting Start/finish and Split Lines below).
 If you want to save your lap times to a file, insert an SD card.
 Drive around the circuit, your times will automatically appear on the DriftBox display:
Big Speed @ Split display
There is a choice of what is displayed in the main area of the Lap timing screen, either your
Lap/Split time, as shown above, or the Vehicle speed as it crosses a split point or start/finish line;
with the current lap in the upper left and the split time in the upper right of the window:
If Split points are placed at the exit of corners then this mode displays the corner exit speed, which
is a very easy way to help you improve your speed out of a particular corner. To display the exit
speed at the last split instead of the time, press the MENU button, highlight „DISPLAY OPTIONS‟
and press the OK button. Next, tick the „BIG SPEED @ SPLIT‟ option.
DISPLAY OPTIONS
SPLIT DISPLAY TIME
SPLIT TO SPLIT TIME
 BIG SPEED @ SPLIT
EXIT