User guide

Racelogic Ltd Performance Mode
- 23 -
1 Foot Rollout
The DriftBox normally takes the start of a performance run at the point at which the vehicle moves,
but at drag strips the vehicle starts 1 foot behind the timing start line. You can make the DriftBox
start all timing runs from 1 foot by enabling this feature.
Enabling 1 Foot Rollout correction
 Press the MENU button to enter the Performance Menu.
 Highlight the 1 FOOT ROLLOUT option and press OK
Results Files
If an SD card has been inserted, DriftBox will create two results files on the card. The first file,
„Results.txt‟ gives the results for every performance test made using DriftBox. The second file,
„Best.txt‟, displays only the best results achieved for each type of test. Results text files are only
created on the SD card if the „Write Results File‟ option has been chosen from the Performance
Mode Menu:
Speed Buzzer
The Speed Buzzer can be used in such tests as 0-100-0, as an audible warning when a certain
speed has been reached. This means that during such testing the driver will not need to watch the
display and can listen for the buzzer instead.
To change the speed at which the buzzer will sound, enter the MENU from any mode, scroll to
Setup and click OK. The speed buzzer is one of the options in the Setup menu. Pressing either the
▲▼ alters the speed setting.
SETUP MENU
DIAGNOSTICS
COLDSTART
SPEED BUZZER
UPGRADE
The speed buzzer will only sound once when the set speed is reached. It will not continue to
activate every time the vehicle passes through the set speed, on acceleration or deceleration. In
order to arm the speed buzzer once more the vehicle must either come to a complete halt for five
seconds, or DriftBox must be power-cycled.
Event Marking
Pressing the OK button when in any of the Speed Mode screens will create an event mark in the
logged file (see „Event Marking‟ in the software section.)
PERFORMANCE MENU
UNITS
 WRITE RESULTS FILE
ACCEL RANGE 1
ACCEL RANGE 2