User guide

Racelogic Ltd Performance Mode
- 22 -
Editing a Performance mode Test Range
You can configure the two speed ranges of the Accel2 and Decel screen to your own custom tests.
If you wish to change the speed range over which performance is measured, press the MENU
button from any of the performance mode screens and select the range you wish to change from
the „Performance Menu‟ and press OK
PERFORMANCE MENU
UNITS
WRITE RESULTS FILE
ACCEL RANGE 1
ACCEL RANGE 2
0-100-0 RANGE
Example: Editing ACCEL RANGE 1
1. Highlight „ACCEL RANGE 1‟ and press OK
2. The following screen will appear with the start speed of ACCEL RANGE 1 highlighted:
3. Whilst the START speed is highlighted use the ▲▼ buttons to change the speed.
4. Press OK and repeat this procedure for the END speed: