User guide

Racelogic Ltd Drift Mode
- 17 -
Sectors
A sector is made up of two virtual gates. If you have enabled Sectors Mode, the measurement
process starts at the first gate, and ends at the second. You can have up to 6 sectors defined, and
you will be awarded a score for each sector along with a cumulative score. You do not have to
have all 6 sectors defined, you can use just one if required. Note that to score in a sector you have
to be drifting continuously, if you straighten up at some point, your score is zeroed at that point.
Sectors are defined separately from Splits because they come in pairs.
Creating Sectors
 Press the MENU button to enter the Drift menu.
 Make sure „SECTORS‟ is ticked.
 Highlight the option „SET SECTORS‟ and press OK.
 Drive towards the start of the first sector and press OK.
 Carry on driving to the end of the first sector and then press OK.
 The screen will now highlight „Start2‟ and you can continue to set up to six sectors in the
same manner. If you want to skip over any sectors, press RESET
 When you have completed the setting of your sectors press the MENU button to return to
the Drift screen.