User guide

Racelogic Ltd Quick Start Guide
- 11 -
Aligning Your DriftBox
1. Park your vehicle on flat ground and turn the engine off.
2. Press the MENU button, then highlight „Setup‟ and press the OK button.
3. Highlight the „ALIGNMENT‟ option and press OK
4. The following alignment screen appears :
5. The screen shows two small lines, a horizontal line and a vertical line within a large cross.
6. Loosen the mounting screws if required and move the suction mount position so that the
two small lines align in the centre of the screen and make the shape of a cross.
7. When the alignment is correct the screen will say „Alignment OK‟, then tighten up the
mounting screws. If the unit needs aligning left to right, release the suction cups and rotate
the DriftBox.
8. Confirm the screen still says „Alignment OK‟ then press OK. For a more detailed instruction
regarding the alignment procedure see the „Setup Menu‟ section of this manual.
9. Now press the MENU button to exit the menus screen and return to the Drift Mode screen.
Your DriftBox is now ready to show your Drift Angle. Note that this alignment is only needed when
using the Drift Mode.
Registering your DriftBox and activating all available functions.
To get full DriftBox functionality including data logging, lap timing and performance mode, you
need to register your DriftBox at the DriftBox website.
Registering Your DriftBox
Log onto the DriftBox website www.driftbox.com then go into Product Registration where you will
be asked to input information including the serial number of the unit. The serial number is
displayed when you first switch on, or alternatively you can note it from the underside of the
DriftBox hardware itself (the serial number will begin with 301.) Once you have entered your details
you will be emailed an activation code. In the case of web-based email accounts, such as Hotmail,
it may be necessary to check the junk email folders. If the activation code email does not arrive in a
timely manner please alert our support team by emailing [e-mail] with your serial
number.