User guide

Racelogic Ltd Quick Start Guide
- 10 -
Quick Start Guide
Connections
Mounting DriftBox in your car
1. Connect the cigar lighter adaptor power cable to the power socket on the back of your
DriftBox.
2. Slide DriftBox into the windscreen mounting bracket.
3. Using the suction cups of the windscreen mounting bracket, fix the DriftBox assembly to a
suitable place low down in the centre of your windscreen.
4. DriftBox has an internal GPS antenna, so try to mount DriftBox where it will have the largest
possible view of the sky.
5. Park your vehicle outside in an open area away from obstacles such as tall buildings and
trees.
6. Insert the DriftBox power cable into the vehicle cigar lighter socket. If power is not
permanently available at this socket, turn on the ignition to ensure power at the socket.
7. The first time DriftBox is used it will need to be left for 10-15minutes to acquire fully the
latest satellite constellation information.
8. After this initial period, DriftBox will then only take 1-2 minutes to lock onto satellites when
you use it next time.
9. Wait for the satellite image to disappear which means lock has been obtained.
10. Before using DriftBox for measuring Drift performance you will need to align the internal
motion sensors.