Specifications

1260-14 User Manual

Module Specific Syntax 3-14 EADS North America Defense

NOTE:

The BUSY line is only valid when synchronous operations

are defined and armed. Spurious signals at other times

should be ignored by the user.

Example:

This command sets the polarity of the BUSY signal to negative

within the module at address 2.

SETUP 2.BUSY,NEG

SETUP CLKIN

command

Syntax: SE[TUP] <address>.CL[KIN],POS | NEG

<address>::= Module address of the 1260-14 (1-12)

Description: This command defines the active edge of the CLKIN

handshake signal. Setting CLKIN to POS causes the module to

trigger on the positive (or rising) edge of the CLKIN signal. Setting

the polarity to NEG causes the module to trigger on the negative

(or falling) edge of the CLKIN signal. The default power-up

condition is POS.

NOTE:

The CLKIN line is only monitored when synchronous

operations are defined and armed. Spurious signals at other

times will be ignored.

Example:

This command sets the active edge of the CLKIN signal to

negative within the module at address 3.

SETUP 3.CLKIN, NEG

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com